Gideros iCade Plugin
This is an iCade plugin for Gideros
Download iCade.zip (last updated May 10th, 2012).
I've modified my iCade plugin to work interchangably with TNT Virtual Pad. I added the following code to the bottom of TNT VP's example2 project and that's all it takes to add iCade support to a project using TNT Virtual Pad.
require "icade" icade = iCade.new() icade:start() icade:addEventListener(ICADE.LEFTPAD_EVENT, leftJoy, self) icade:addEventListener(ICADE.BUTTON7_EVENT, fire, self) icade:addEventListener(ICADE.BUTTON8_EVENT, protection, self)
There is no connection between the iCade behavior and what the TNT Virtual Pad looks like. The TNT Virtual Pad will dim automatically and I think that's probably the best way to handle it.
This iCade plugin produces events with data that looks exactly like TNT Virtual Pad events. The iCade events are named differently though, because I don't want to trigger events twice.
When using the TNT Virtual Pad and the iCade at the same time (one hand on the joystick, one finger on the screen), the joystick values add up, which can produce some unintended side effects (moving twice as fast or canceling out the movement). Shooting can be achieved twice as fast as well.
This is how I'm deciding to avoid simultaneous input from the Virtual Pad and iCade. I added an iCade table field to all iCade generated events. If the event is a Virtual Pad event I record the os.time() and wont evaluate any iCade events if a Virtual Pad event happened in the last second.
This is the modified example 2.
local timeVirtualPadLastUsed local function preventVirtualPadICadeSimultaneousUsage(e) if e.data.icade == true then -- It's the iCade, make sure the virtual pad wasn't used in the last second if os.difftime( os.time(), timeVirtualPadLastUsed ) >= 1 then return true else return false end else -- It's the virtual pad timeVirtualPadLastUsed = os.time() return true end end local function leftJoy(e) if preventVirtualPadICadeSimultaneousUsage(e) then if e.data.power > 0.2 then textfield:setText("Power: "..tostring(e.data.power).." Angle: "..tostring(e.data.angle)) biPlane:move(e.data.angle, (e.data.power*150)*e.data.deltaTime) end end end local function fire(e) if preventVirtualPadICadeSimultaneousUsage(e) then if e.data.state == PAD.STATE_BEGIN then local fire = CLASS_fire.new(biPlane.xPos, biPlane.yPos-20) stage:addChild(fire) end end end local function protection(e) if preventVirtualPadICadeSimultaneousUsage(e) then if e.data.state == PAD.STATE_DOWN then biPlane.protection:setVisible(true) else biPlane.protection:setVisible(false) end else -- reset everything to defaults to since an iCade button release will now be ignored and could leave the protection on forever biPlane.protection:setVisible(false) end end
Obviously there is no iCade right pad and it supports 8 buttons and right now it isn't really configurable. I don't believe there is even anything to configure...
I did notice some stuttering with my plugin (didn't happen with plugin removed) so maybe I need to optimize it a bit.
One other annoyance is that when the iCade is connected to the iOS device the keyboard shows then hides. I am not sure how to get around that.
Copyright 2017 James Reynolds